What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
14.06.2025 04:25

nine
One is “what exactly is in a ‘surge protector’ ? ”
Because the load is inductive, the current lags the voltage.(by a bit).
If white people had been slaves, would WLM be a thing right now?
The other is “what does a “fuse” do?”
At one ohm, the resistor has a maximum of 1 watt power.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Do guys ever want to suck a dick even though they are straight?
eight
This device then solves the entire problem.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
but I think this circuit , shows a few more pieces.
Why do narcissists keep calling on the phone after years of separation?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Here is a simplified AC power diagram.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Netflix’s Buzzy New Doc About an Infamous Tragedy Shows It’s Just the Beginning - Slate Magazine
This is 'the assistant's answer'
First Sentence:
Barnstars:
So, the voltage could go up to 500 volts, and the fuse will not open up.
2024–10–10[John johnson John Johnson ]
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
How can I get a girlfriend? I am 26.
He then describes the function of a fuse.
A fuse is a non-resetable over current circuit protector.
An AC voltage/ current source, and an ac inductive load.
Why do boobs of some girls bounce when they walk?
The MOV will conduct when the voltage exceeds 50% of line voltage.
(Dc diagram shown, AC is similar).
Upvotes:
Did you become a cuckold for your wife?
Edit 2024–10.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Have you ever dealt with a Christian narcissist?
It also is a device that limits the change in current flow.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
One
What is a good way to conduct an interview?
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
The third is lightning and “how it gets conducted into a home.”
What does a fuse do?
Can you make a fake K-pop group? It can be with any idols.
what exactly is a ‘surge’ protector?
2024–10–16 [ OO OLAOYE OYEBODE ]
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Why did the American's mulberry harbor not hold up after D-Day?
What is lightning?
a photo is worth a thousand words.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
In schematic diagrams this is the symbol for a fuse:
This one hit behind the barn.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Are Americans really as uneducated and ignorant as portrayed in the media?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
the problem then depends on "how fast does the fuse operate?".
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
I post the exact comment here.
[image of Common-mode choke]
A circuit breaker is similar, but is resettable.
For this case there are devices called Metal oxide varistors (MOV).
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
This is where the MOV conducts again, and dissipated the energy.
At least they know the answer if they wanted it.
There are three different concepts here that are getting confused.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
He then describes Rainy Season and Lightning.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Now when you have a certain ac resistance, then a current flows in a loop.
[old diagram got deleted by accident]
2024–10–14 [Omar Gharbi Omar Gharbi ]
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
He then asserts :
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
But it can get overloaded, and no longer works.
There are two important concepts here.
But… the neutral is now “floating” because of the 1 ohm resistance.
These are simplified answers to the original question, and does not change anything I wrote above.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
These devices are installed between the “hot” and “neutral” and protective ground.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
but this device (an Inductor) … impedes the rapid changes in the current.
This is where this question deviates from being a 'generic' question, and becomes more specific.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
The bolt then partially travels down the line to your home.
It seems Mohan does not understand the difference between a comment and an Answer.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
so, what happens?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).